Bioenno Tech LLC / Bioenno Power BLF-12150TS/AS

The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-12150TS is a 12 Volt/150 Ah battery based on state-of-the-art Lithium Iron Phosphate electrodes. Featuring a power density which can only be matched by the combined output of three 12 Volt 100 Ah capacity SLA batteries while weighing less than a single 12 Volt 100 Ah SLA, this is one of the most powerful and capable power units on the market. As with all Bioenno Power batteries, this unit includes as standard a fully integrated advanced single-board micro computer control system known as a PCM (protection circuit module). This allows the battery to give you 5-10+ years of maintenance free reliable performance at 2000+ charge cycles with the ability to discharge up to 90% of its rated capacity. Ideal for all applications ranging from powering motors to solar storage, this battery additionally boasts no EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) and is absolutely quiet! The unit has an available optional 120VAC/240 VAC AC-to-DC charger that provides 20A with Alligator Clips. Please note that this battery should be charged using a LiFePO4 compatible charger, and not with a charger for SLA batteries.

BLF-12150TS User Manual [PDF]

BLF-12150TS Battery Specifications
Voltage: 12V
Capacity: 150Ah
Form Factor: ABS Sealed
Charge/Discharge Connector: Screw Terminal
Maximum Continuous Discharge Current: 100A (Make sure your load consumes less than 100A)
Maximum Continuous Power: 1200 Watts (12V x 100A = 1200 Watts) (Make sure your load consumes less than 1200 Watts)
Dimensions: 19.5 in. x 6.75 in. x 9.5 in. (496 mm x 172 mm x 242 mm)
Weight: 44 lbs. (20 kg.)
Includes built-in PCM (protection circuit module) which provides internal cell balancing and management, protection from overcurrent, undervoltage (overdischarge), overvoltage and short circuiting, and has integrated charging circuitry.
Available 120VAC/220 VAC Charger