Freight Item
Special Order Item!*
HRO Discount Price: $7,149.95*
*After Coupons & Promotions. Due to the shipping complexity of this item an additional shipping charge will be added when shipped.
*This item is ordered directly from the factory. In some cases it may be drop shipped directly to you.
For current inventory status please contact your local Ham Radio Outlet and a salesperson will assist you.
US Tower's freestanding TX Series crank-up towers are as strong or stronger than most competitors’ heavy-duty models. The TX Series towers have 21 foot sections with 4 foot overlap to provide extra height and strength. In addition, the overlap helps prevent binding while lowering your tower in high wind conditions.
The TX Series towers have a large enough top section (12½”) to permit installation of most rotors inside the section for maximum strength while allowing the section to fully retract. Cross-bracing at critical points on the tower ensure safety and additional strength. All US Tower crank-up towers have a heavy-duty hot dipped galvanized finish both inside and out, which should provide many years of trouble-free service.
All T-bases will accept the TRX Series raising fixtures for easy one-man installation. All TX Series towers include Fulton hand winches (except MDP and MDLP models) which feature automatic load actuated brakes for maximum safety. Masts and motor drives are available as accessories (see accessory listing below).
US Tower's TX Series requires no guying. The wind loading is calculated at 90 mph winds per TIA/EIA specifications. To assist you in applying for necessary construction permits, IBC 2006 calculations are available for most models.
Comes assembled with a winch and a rotor plate mounted in the top section.
This item must be delivered by truck freight, truck freight charges will apply.Typical lead times for delivery range from 8-16 weeks.
6 BASE 10810-0004-2003
#6 T-Base for TX-455 / HDX-538 / TMM433SS - Plus Shipping - 30 Lbs.
CX-3
Coax Arms for 3 Section Towers
IV-16
Inverted Vee Bracket
M-10
10 Foot Antenna Mast - 2 Inches O.D. - .120 Inch Wall
M-15
15 Foot Antenna Mast - 2 Inches O.D. - .120 Inch Wall
M-15R
15 Foot Antenna Mast - 2 Inches O.D. - .250 Inch Reinforced Wall
M-20
20 Foot Antenna Mast - 2 Inches O.D. - .120 Inch Wall
M-20R
20 Foot Antenna Mast - 2 Inches O.D. - .250 Inch Reinforced Wall
M-5
5 Foot Antenna Mast - 2 Inches O.D. - .120 Inch Wall
MD-75
Heavy Duty Motor Drive with 1 Horsepower Motor - Plus Freight!
RP-4 20201-0007-0007
Rotor Plate for 12-1/2 Inch Tower Section - Plus Freight
TB-2US
2 Inch Thrust Bearing - for 2 Inch Mast - Plus Freight
TRX-80
Tower Raising Winch
M-8
2 O.D. x 8 ft. Galv. Mast 20 lbs
BASE KIT 4900-003
TMM433SS, HDX538, TX455 BASE KIT
4100-009
TX455MDP Cable and Hardware Kit (Plus Freight)