The ACOM 1000 HF Linear Amplifier is the world's best value in an amateur HF amplifier. The ACOM 1000 gives you a comfortable 1000 Watts output on all
amateur bands from 160 through 6 meters.
Easy to operate
The plate-load True Resistance Indicator (TRI) is a powerful tuning aid which, together with the automatically controlled input attenuator, helps the operator to
quickly and precisely match antennas (5-10 seconds typically). The auto-operate function (when enabled) maintains the amplifier in OPERATE mode for you, thus saving manual operations and
No antenna tuners
The amplifier will perform the functions of an antenna tuner for VSWR up to 3:1, thus enabling you change antennas faster and use them over a wider frequency range
(saving tuning time).
An amplifier that is both user-friendly, and that looks after itself. It is designed to safely withstand up to 300W reflected power, up to 100 milliseconds duration
of drive spikes, drive RF "tails" after a PTT or KEY release, operator's inadvertent tuning errors etc. It also does not cease to function with a "soft" AC line and will deliver more than half
power at only 75% of nominal mains voltage. Withstands up to 10 milliseconds (down to zero) voltage drops, and up to +15% line voltage spikes - important particularly when used at field day, on
LCD comment display
Text messages,12 parameters, and strip peak-reading PEP meter displayed on a dot-matrix, back-lighted LCD. LED indicators are provided for OPERATE, attenuator-on,
and ON/OFF conditions.
Signatures of the amplifier's internal status are stored in a nonvolatile memory for 7 most recent auto protection trips. This information is used for
Virtually silent QSK
The input bypassing and the vacuum antenna relays are very quiet even in CW mode due to their special mounting.
Broadband input matching
Resulting in very good load to the transceiver over the entire spectrum 1.8-54MHz.
Single 4CX800A (GU74B)
A Svetlana high performance ceramic-metal tetrode with plate dissipation of 800W is employed (forced air cooling, grid-driven).
Permanent monitoring and protection of plate and grid voltages and currents, as well as of the exhaust temperature.
ACOM 1000 specifications
• Frequency Coverage: All amateur bands 1.8-54 MHz;
extensions and/or changes on request.
• Power Output: 1000W PEP or continuous carrier,
no mode limit.
• Intermodulation Distortion: Better than 35 dB below
• Hum and noise: Better than 40 dB below rated output.
• Harmonic Output Suppression:
-1.8-29.7MHz - better than 50dB below rated output;
-50-54 MHz - better than 66dB below rated output.
• Input and Output Impedances:
- nominal value: 50 Ohms unbalanced, UHF (SO239)
- input circuit: broadband, VSWR less than 1.3:1,
1.8-54MHz continuously (no tunings, no switching);
- bypass path VSWR less than 1.1:1, 1.8-54MHz
- output matching capability: better than VSWR 3:1 or
greater at reduced output levels.
• RF Gain: 12.5dB typically, frequency response less
than 1dB (50 to 60W drive power for rated output).
• Primary Power: 170-264 V (200, 210, 220, 230 & 240 V
nominal taps, 100, 110 & 120V taps on request,
+10%-15%tol.), 50-60Hz, single phase, 2000 VA
consumption at rated output. Supplied wired for 240 VAC.
• Complies with CE safety and EMC requirements, as well as
FCC-regulations (6,10 & 12m bands lock provided).
• Size & Weight (operating):
- WxDxH: 422x355x182 mm, 22 kg.
- (16.6x14x7.2 inches, 48.5 lbs)
• Operating environments:
- temperature range: 0...+50 degs.Celsius;
- humidity: up to 75% @ +35 degs.Celsius.
- height: up to 3000 m above sea level
without output deterioration
All ACOM Amplifiers come with a two (2) year factory warranty.
If your ACOM product fails within the first 120 days, ACOM will prepay shipping to their warranty service center. Shipping will also be prepaid back from the repair
center. This is an exclusive warranty for HRO customers only and is the best warranty in the industry.
After 120 days through 2 years ACOM will require payment by the customer for shipping to their repair facility. Shipping will then be prepaid by ACOM for the return
of the serviced amplifier. ACOM will repair or replace your unit at any time during the two (2) year warranty period.
Warranty Coverage for the tube or tubes in all ACOM amplifiers is one (1) year.
Shipping weight 60lbs
ACOM Service Center - AVSL
829 Lynnhaven Parkway
Virginia Beach, VA 23452-7224