condition. This one is a workhorse! Amplifier is very
clean. It will ship with a 3 month
RF Concepts warranty on the amplifier and on the tubes.
Frequency Coverage: A l l amateur bands 1.8-29.7
MHz* plus most non-amateur frequencies
6.0-19.0 MHz and 20-30 MHz.
* NOTE: FCC rules do not permit new amateur
amplifiers to be operable on 24-30 MHz as delivered
within the U.S. &
possessions. Owners who send ETO Customer Service a photocopy of their
authorizing amateur license will promptly be provided information on "unlocking"
12 and 10 meter
Band Change & Tuning: Manually controlled by
Power Output: 1500 watts PEP, keyed CW, or
continuous carrier, no time limit. Auxiliary
cooling fan (optional)
recommended for high duty cycle continuous operation.
Drive Power: Typically 50-60 watts for full rated
Input VSWR: < 1.5:1 within amateur bands; <
Tube Complement: Two Eimac 3CX800A7 triodes in
T/R System: Heavy duty PIN diode switch Switching
time approximately 1 mS. Enclosed
mechanical bypass relay.
ALC: Grid-current-derived, adjustable to -10V
Harmonic Output: Better than 55 dB below rated
Intermodulation: Better than 36 dB below rated
Fault Protection: Plate overcurrent, grid
overcurrent, high reflected power (load VSWR), T/R
(i.e., severe mistune or RF arc), overdrive, other.
Displays: Dedicated L E D bargraphs for peak Pout,
Prefl, and Ig, plus switched bargraph for
average Ip, HV, T U N E indicator,
drive power, and load VSWR.
Cooling: Full cabinet ducted-air, rear intake/top
exhaust Floating blower mount for quietest
Primary Power: 190-250V (200,220,240V nominal
taps), 50-60 Hz, single phase; fused 20A.
Size & Weight: 17.3"W x 7"H x 16.5"D (439 x 178
x 419 mm) excluding controls, feet &
connectors; 75 lb. (34 kg)