APACHE LABS ANAN-7000DLE
APACHE LABS-ANAN-7000DLE-Image-1 APACHE LABS-ANAN-7000DLE-Image-2

APACHE LABS ANAN-7000DLE

HF & 6M 100W SDR Transceiver

Regular Price: $2,995.00

Additional Savings

-$200.00  Dayton Sales Promotion Discount! (Exp:05/20/18)

HRO Discount Price: $2,795.00*

 

*After Coupons & Promotions.

Current Stock Status At These Ham Radio Outlet Locations
ANAN-7000DLE Description     Hide

The ANAN-7000DLE HF & 6M 100 W SDR Transceiver offers top of the line performance is a compact rugged package, it is based on the work of the OpenHPSDR community.
The radio uses the Orion MKII and has an entirely redesigned transmit chain keeping in mind PureSignal (Predistortion), the result is astounding IMD performance, typical IMD on 20M (with PureSignal enabled) is -62dB or -68dB below PEP output.
The receiver includes two phase synchronous front ends to enable Diversity reception, receiver RMDR is class leading (116 dB @ 2 kHz offset).
The new PA board incorporates the following updates over the previous generation:
1. PA Gain redistribution for better IMD
2. Thermally compensated Bias
3. Current/Voltage/Temp Sensors
4. Temp controlled internal and option for external FAN
5. Independent BPFs and 6M LNAs for each ADC, option to ground ADC2 on Tx
6. Several other minor tweaks

Specifications:

General Specifications:
• Architecture: Direct Sampling DDC/DUC Transceiver
• Interface: Ethernet
• Phase Noise (Clock): -149dB @ 10Khz
• TCXO Stability (Typical): /- .1 PPM
• Modes: CW, SSB, NFM, AM, Digital
• Antenna Ports: Three BNC 50 Ohms Software Configurable Ports, Three BNC ADC1 Bypass and Loop in ports, One BNC for RX2
• Frequency Resolution: 1 Hz
 
Electrical Specifications:
• 13.8 V DC @ 25 A, 3 A Receive/25 A Transmit
 
Mechanical Specifications:
• 5Kg (approx. Weight)
• Dimensions: 276 MM (L) x 79 MM (H) x 265 MM (W) (Not including extrusions)
• Rugged Aluminum Extrusion with Temperature controlled internal/External (Optional) Fan.
 

Receiver Specifications:
• Receiver Architecture: Direct Down Conversion
• Dual 16 bit Phase Synchronous ADCs
• Independent filter banks for each ADC
• 6M LNAs
• Frequency Coverage: 9 kHz to 60 MHz
• Attenuator: 1-30 dB step attenuator
• Reciprocal Mixing Dynamic Range (RMDR): 116 dB @ 2 kHz offset
• Receiver Phase noise: -149 dB @ 10 kHz
• Image rejection: 90 dB
• Hardware support for 7 independent receivers assignable to either ADC
 
Transmitter Specifications:
• Transmitter Architecture: Direct Up Conversion
• DAC Resolution: 16 bit
• RF Output Power: 100 Watts SSB, CW, FM, RTTY, Digital; 1-30 Watts AM
• IMD: IMD3 typically 68 dB below PEP @ 100 Watts output on 20 M
• Harmonics: Typically better than -43 dBc on HF and -60 dBc on 6M
• Carrier and Opposite Sideband Suppression: Better than -80 dBc
• Transverter IF Output: 0 dbm to 15 dBm
 
IOs:
• RCA Line In, Line Out, PTT in, PTT Out
• DB9 Seven Software Configurable Open Collector Outputs
• SMA XVTR, 10 MHz Reference Input
• 3.25mm Barrel Mic, CW Key, Headphones and  two 6.25mm Speaker Outputs
• RJ45 Ethernet LAN Connector

ANAN-7000DLE Accessories and Related Items
XDL-50 BNC

XDL-50 BNC

BNC 50 Ohm Terminator Connector

$2.95
INCLUDE
XDC-4N

XDC-4N

44dB 1-60 Mhz 3000 Watt Directional Coupler - N Female Connectors

$149.95
INCLUDE
XDC-4SO

XDC-4SO

44dB 1-60 Mhz 3000 Watt Directional Coupler - SO-239 Female Connectors

$149.95
INCLUDE
XAT-10SMA

XAT-10SMA

10dB Attenuator - Inline SMA Male to SMA Female - 50 Ohms - 500 mW - 1/2 Watt

$11.95
INCLUDE
XAT-20SMA

XAT-20SMA

20dB Attenuator - Inline SMA Male to SMA Female - 50 Ohms - 500 mW - 1/2 Watt

$11.95
INCLUDE