HEIL BM-10ic
HEIL-BM-10ic-Image-1 HEIL-BM-10ic-Image-2

HEIL BM-10ic

Lightweight Headset / Boom Mic with Condenser Element for Icom - AD-1iC Adapter Included

Regular Price: $149.95

Additional Savings

-$11.00  HRO Summer Time Sales Event! (Exp:08/31/18)

HRO Discount Price: $138.95*


*After Coupons & Promotions.

Current Stock Status At These Ham Radio Outlet Locations
BM-10ic Description     Hide

The BM-10 headset was designed to be a lightweight (only 3 oz), articulate sounding boomset that is ideal for DXpeditions, mobile, and general rag chewing.

The speakers used in the BM-10 are extremely sensitive and don’t require much AF drive from the transceiver. The frequency response is 60 Hz- 12 kHz with very low distortion. The ear pads are replaceable acoustic foam.

The BM-10-iC, using our iC electret element, was created for use on the Icom radios. Working with Icom America this element has been made to eliminate the low gain audio on some older and non-pro series radios. This element must be paired with the 8 pin round AD-1-IC (included), or AD-1-ICM adapter (for use with radios with modular microphone connections, like the 703, 706, 7000, 7100, etc).

The "IC" series adapters have no internal DC blocking capacitor so power is passed allowing the IC electret element to operate. The IC element has an operating frequency response of 35Hz - 12kHz.

The microphone audio for the BM-10 series terminates into a 1/8" male plug while the head phone terminates into a 1/8" stereo plug. (1/8" to 1/4" adapter included), and the in line PTT terminates in a 1/4" mono plug. The cable features a built in Push to Talk (PTT) button with a conveinent clip on the back to keep it in place.

The use of the AD-1 series mic adapters allow simple interface with popular transceiver inputs. The adapter is 6-8” long and has a 1/8” female input jack for the boomset microphone while the 1/4” female that exits the adapter is the PTT (push to talk) line for the Heil foot switch or hand switch. The 1/8” or 1/4” stereo plug goes into the headphone jack on the transceiver front panel.

The boom is held to the headphone speaker by the use of a boom clip. When removing the boom it is imperative to pull straight down and out of the clip not to the side as this may break the clip.

Tension adjustments of the earphones to your ears is done by bending the spring stainless steel pieces as they exit the headphone speaker. More or less pressure can be applied to the ears by proper adjustment. included).

    Manufacturer's Website
    Product Website

BM-10ic Accessories and Related Items


Icom Headset Adapter for Condenser Proset & BM Elements - Modular Plug with No Cap