BEKO HLV-1000

BEKO HLV-1000

2 Meter Linear RF Power Amplifier with 1,000 Watts RF Output

HRO Discount Price: $3,149.95*

 

*After Coupons & Promotions.

Current Stock Status At These Ham Radio Outlet Locations
HLV-1000 Description     Hide

BEKO HLV-1000        
2 Meter RF Power Amplifier with 1,000 Watts RF output
 
Designed for Weak Signal, Tropo Scatter, Meteor Scatter, Digital, & Contest Operation!
The BEKO HLV-1000 employs advanced German engineered solid state technology to deliver instant on, no compromise performance.
Due to its small foot print and light weight, the HLV-1000 is the ideal amplifier for: Contest, portable, EME & home station operation.

HLV-1000 Features:
* Instant on (No warm up needed)
* No tuning required.
* Covers 144-148 MHz
* Full output with only 25 watts drive level. 
* 1,000 watts RF Output SSB/CW/Digital Modes/FM (** 1100 watts typical**)
* Output Transistors: NXP BLF188XR      
* 1 dB Compression Point > 1050 W
* Harmonics                            -75dBc
* Spurious                             - 70dBc
* Return Loss                          20 dB
* Max. SWR                            2.0 : 1
* WSJT / Digital Mode at rated output
* Equipped with NXP's BLF188XR transistors
* New, super fast, accidental-overdrive / spike protection up to 150W
* Built-in IMD indication
* An integrated sequenced voltage to control external mast-mounted preamplifiers is provided. A built in Bias-T allows the preamp voltage to be injected onto the coaxial cable. For those preamplifiers that can’t be powered via the coax and require a separate DC cable, the sequenced voltage is available via a back panel connection.

  As with all Beko Elektronik amplifiers, a front panel switch allows the user to select external preamp On / Off function thus allowing the preamplifier to be switched in-line or off-line.  The HLV-1000 and HLV-1000LPD amplifiers provide a direct connection to the new Beko HPP-144 2.5 kW mast mounted preamplifiers.

* Extremely High efficiency     > 75%
* Extremely light weight          22 lbs.
* Dimensions                        300 x 170 x 470mm    (11.8 x 6.69 x 18.5” WHD)
* Voltage Requirements:         180-260 VAC 50/60 Hz. for Rated Output      100-130 VAC for ½ Power
* Operating Conditions:          0…….40 degrees C

Note:

BEKO HLV-1000LPD Option Available - Call for Details
2 Meter RF Power Amplifier with 1,000 Watts RF output with as little as 3 mW RF Drive

All Beko amplifiers are VSWR, Overdrive and Temperature Protected.

BEKO amplifiers are “the best of the best” VHF UHF & SHF high-power linear amplifiers available worldwide!

 

    Manufacturer's Website
    Product Website