Can be used with a lip mount or used alone as permanent hole mount.
Coax length: 9' 9" total
The first 12" of coax is mini RG-188 type allowing easy entry into the vehicle through the weather seal without causing wind noise, water leaks or impedance mismatch due to the coax being crimped or damaged.
The balance of the coax is low loss, .25 inch outside diameter.
The PL-259 connector has a reverse threaded barrel. Turn the outer barrel clock-wise and it will thread off the connector body. The coax can then be routed through small holes or pushed through tight spaces without completely removing the connector. After routing the coax into place, screw the barrel back onto the PL-259 connector.
Supplied with 3/8 10-24 fitting for popular 'stick' type antennas.