Base Station Desktop Dynamic HF Microphone MD-100A8X.
Selectable low-cut filtering and high-emphasis active filtering that allow you to tailor the microphone response for optimum voice clarity or DX punch.
A multi-axis pivoting mount lets you adjust the horizontal and vertical position of the microphone to accomodate various locations and heights, or you can remove the microphone from the base and use it independently (an auxiliary toggling PTT button is provided, but the audio filering and scan controls cannot be used).
The base of the MD-100A8X includes a large push-to-talk (PTT) switch and latching button, along with a large rotary up/down, slow/fast control for scanning.
Jacks and cabling are provided to accomodate Yaesu transceivers having either RJ-45 or round 8-pin MIC jacks.
Note that some older 8 pin round radios may not benefit from the scan function: a hardware modification is required to use preamp and up/down controls with FT-1000 FT-890 FT-747GX FT-757GX radios
(Additional adaptor required for use with FT-100 series radios.)
Not recommended for use FT-2400H/-7400 series, FT-2500, FT-8500, or others than those listed above. Damage may result from modular jack wiring incompatibility.