is a versatile and expandable transceiver. It offers professional performance,
out of the box on HF, 6 meters and 2 meters with 100 watts. The 440 MHz band is built-in with 75 watts. The UX-9100 band unit can also be added at
any time to permit operation on 1200 MHz, with a power of 10 watts.
IC-9100 can simultaneously receive on two different bands and works as if there
are two independent receivers in one radio. Each main and sub-receiver has a
dedicated DSP unit providing flexible digital IF filters, AGC time constant,
twin PBT, manual and auto notch filter, noise reduction, noise blanker, etc. The
USB port can transfer modulator, received audio, RTTY demodulator and DV mode [optional UT-121 required for D-Star operation]. Satellite operation is not an after-thought on this transceiver.
satellite mode synchronizes the uplink (transmitting) and downlink (receiving)
frequencies and shifts the frequency with the same tuning step. Twenty
alphanumeric satellite memory channels store frequency, mode and tone settings.
built in RTTY demodulator and decoder allows you to read a RTTY message
instantly without an external PC or external decoder.
built in automatic tuner covers the HF bands plus 6 meters. Other refinements
include electronic keyer jack on the front panel, four
CW memories, voice squelch control, band edge beep,
built in voice synthesizer.
multi-function meter shows signal strength, output power, SWR, ALC and
compression level. There are main and sub-receiver speaker
device requires 13.8 VDC at 24 amps. 12.5 x 4.6 x 13.5 inches
24.3 lbs. (315x116x343mm 11 kg).
Shipping carton 24 x 21 x 13, shipping weight 36lbs.
Dimensional weight of 48 lbs for international air shipment applies.