The Yaesu FTM-150RASP is a Full-Featured 144/430 MHz FM Dual Band Mobile Transceiver Delivering 55 Watts on VHF and 50 Watts on UHF. It pairs the Super-DX RF Front End with an Audio Digital Signal Processor (ASP) for Improved Weak-Signal Reception, and adds True Dual Band Operation, a High-Resolution Dot-Matrix Display with Scope Function, a Dual Speaker System, and 1103 Memory Channels. Optional Bluetooth, Voice Guide, and Swing-Head Kits let you Tailor the Radio to your Vehicle and Operating Style.
Features:
- 55 W (144 MHz) / 50 W (430 MHz) Output with Selectable 25 Watt and 5 Watt Power Levels
- Super-DX Function Increases RF Amplifier Gain to Improve Reception when the Received Signal Is Weak
- ASP (Audio Digital Signal Processor) Digitally Separates and Removes Noise Components from Received Audio for Clearer Voices; it works in conjunction with Super-DX
- True Dual Band Operation (V+V / U+U / V+U / U+V) with Two Independent Receiver Circuits
- Independent Dial Knobs, VOL/SQL Knobs, and LED Indicators for Each Band on the Left and Right Sides of the Control Head
- PMG (Primary Memory Group) stores up to 5 Frequently Used Channels and Monitors Them With Real-Time Bar Graph Activity; AUTO and MANUAL Modes are Selectable
- Dual Receive and Scope Operation: Press and Hold the [BAND] (SCOPE) Key to View Activity and Signal Strength of up to 47 Channels (up to 23 Channels in Memory Mode)
- Dual Speaker System with a Total Audio Output of 6 Watts (3 Watts Main Unit + 3 Watts Front Speaker), with Adjustable Volume Balance from 0 to 100%
- Wide-Band Reception from 108 MHz to 499.995 MHz, with Analog FM and AM (Air Band) Modes
- Large 1103 Memory Channel Capacity: 999 Memories, 4 "Home" Channels, and 50 Sets of PMS Memories, with 8-Character Alphanumeric Labels
- Memory Auto Grouping (MAG) Automatically Sorts Memory Channels by Band for Quick Recall (M-ALL, M-GRP, M-AIR, M-VHF, M-UHF, OTHER)
- CFL (Customized Function List) Registers up to 9 Frequently Used Functions for Easy Access with a Single Press of the [F] Key
- Memory Data Transfer to the VFO Register lets you Operate from a Stored Channel's Data without Changing the Memory Setting
- High-Resolution Graphical Dot-Matrix Display with Amber or White Selectable Backlight
- FACC (Funnel Air-Convection Conductor) Cooling System Ensures Stable High-Power Output for Sustained Communications
- Control Head with Microphone Jack allows the Microphone to Connect at Either the Control Head or the Front of the Transceiver Unit
- Optional SJMK-500 Swing-Head Kit Allows Angle-Adjustable Control Head Placement (No Extension Cable Required)
- Optional Bluetooth Operation with the BU-5 Unit and the SSM-BT20 Headset (approximately 20 hours of operation per charge)
- Optional FVS-2 Voice Guide unit Announces Operating Frequency or Band Changes, and Records up to 5 Minutes of Received Audio or Continuously Records the Last 30 Seconds
- MicroSD Card Slot (up to 32 GB) for Memory Backup and Cloning Radio Data to Other Compatible Radios
- Supplied SSM-85D DTMF Microphone with Illuminated Keypad and 4 Programmable Keys (P1-P4)
- Built-in CTCSS, DCS, and EPCS (Pager) Encode/Decode Functions, including Selective Call Features
- Split Memory Function and VFO Band Skip Function
- VOX (Voice Activated Transmit) Operation
- Sub-Band Off Function Displays Frequency in Large Size Numbers
- ARS (Automatic Repeater Shift), APO (Automatic Power-Off), and TOT (Time-out Timer)
- DTMF Encode and DTMF Memory
- NOAA Weather Alert When Available In Your Service Area
- Keylock Function
Specifications:
- Frequency Range (RX): 108-137 MHz (air band), 137-174 MHz (144 MHz HAM / VHF band), 174-400 MHz, 400-550 MHz (430 MHz HAM / UHF band)
- Frequency Range (TX): 144-148 MHz, 430-450 MHz
- Channel Steps: 5, 6.25, (8.33 air band only), 10, 12.5, 15, 20, 25, 50, 100 kHz
- Frequency Stability: ±2.5 ppm (-4°F to +140°F / -20°C to +60°C)
- Emission Type: F2D, F3E
- Supply Voltage: Nominal 13.8 V DC, negative ground
- Current Consumption: 0.5 A (receive); 11 A (55 W TX, 144 MHz); 10 A (50 W TX, 430 MHz)
- Operating Temperature: -4°F to +140°F (-20°C to +60°C)
- RF Power Output: 55 W (144 MHz), 50 W (430 MHz), 25 W, 5 W
- Modulation Type: Variable Reactance Modulation (F2D, F3E)
- Maximum Deviation: ±5 kHz
- Spurious Emission: At least 60 dB below
- Microphone Impedance: 2 kΩ
- Data Jack Impedance: 10 kΩ
- Circuit Type: Double-conversion superheterodyne
- Intermediate Frequencies: 1st: Main 56.75 MHz, Sub 55.85 MHz; 2nd: 450 kHz
- Sensitivity: 0.2 µV for 12 dB SINAD (137-150 MHz, FM); 0.25 µV (150-174 MHz, FM); 0.2 µV (420-470 MHz, FM); 0.8 µV TYP for 10 dB SN (108-137 MHz, AM)
- Selectivity (NFM, AM): 12 kHz / 30 kHz (-6 dB / -60 dB)
- AF Output: 3 W (8 Ω, THD 10%, 13.8 V) front speaker, internal speaker, and external speaker
- AF Output Impedance: 8 Ω
- Dimensions, Radio Unit (W x H x D): 5.47" x 1.66" x 5.23" (139 x 42 x 133 mm) without fan
- Dimensions, Controller (W x H x D): 5.82" x 2.2" x 2.2" (148 x 56 x 56 mm) without knob
- Weight: Approx. 2.64 lbs (1.2 kg), transceiver unit with control head
- Included Accessories: SSM-85D DTMF microphone, mounting bracket, DC power cable