The Triple Match gives you Three Choices of Base Impedance Matching for Tarheel Design Antennas.
High Power Antennas come with a Single Match but sometimes because of Mounting/RF Grounding/Coupling issues one single match is not enough to get a low enough SWR to keep the equipment happy.
This is a must if running a amplifier mobile.
It comes with a #5 and #10 Matching "Spud". That will cover all bands on most installs.
Includes:
- Triple Match Box
- #5 Spud Matching Coil
- #10 Spud Matching Coil
- Three Position Switch
- 20' Control Cable
- Ferrite
- Clamp
- Matching coil covers
Install is simple, it clamps to the antenna. You have a antenna side connection and a ground side connection. Coax connection in the center.
There are other ways to connect using a T connector.
On most installs the center spot(0) is covered, no matching used for 10 to 15 meters..(1) spot uses the #5 spud for 17 to 30 meters and the (2) position uses the #10 spud for 60 to 80 meters.
