Download The Exciting and Newly Updated Raspberry Pi3 Image: Click Here! RSPduo Dual Tuner 14-bit SDR
The SDRplay RSPduo is a dual-tuner wideband full featured 14-bit
SDR which covers the entire RF spectrum from 1 kHz to 2 GHz
giving 10 MHz of spectrum visibility. Combined with the power of
SDRuno software for Windows, you can simultaneously monitor
two completely separate 2 MHz bands of spectrum anywhere
between 1 kHz and 2 GHz. The RSPduo provides three software
selectable antenna inputs, and clocking features ideally suited to
industrial, scientific and educational applications. All it needs is
a PC and an antenna to provide excellent communications
receiver functionality. A documented API allows developers to
create new demodulators or applications around the platform.
KEY BENEFITS
Simultaneously receive on two totally independent 2MHz spectrum windows anywhere between 1 kHz and 2 GHz
Simultaneous processing from 2 antennas enables direction-finding, diversity and noise reduction applications
Ideal for cross band full-duplex reception, e.g. HF + VHF or VHF + UHF
Simultaneous Dump1090 and VHF ATC reception
Simultaneous monitoring and recording of 2 ISM bands
Covers all frequencies from 1 kHz through VLF, LF, MW, HF, VHF, UHF and L-band to 2 GHz, with no gaps
Receive, monitor and record up to 10MHz of spectrum at a time (single tuner mode)
External clock input and output for synchronisation purposes, or connection to GPS reference clock
Excellent dynamic range for challenging reception conditions
Works with popular EXTIO-based SDR software (available mid 2018)
Software upgradeable for future standards
Strong and growing software support network
API provided to allow demodulator or application development
Calibrated S meter/ RF power and SNR measurement with SDRuno (including datalogging to .CSV file capability)
Ideal for portable monitoring of ISM/ IoT/ Telemetry bands <2GHz
World-class technical support via www.sdrplay.com
KEY FEATURES
Dual tuner provides independent coverage from 1 kHz to 2 GHz using 2 antenna ports simultaneously
14-bit ADC silicon technology (not another 8 bit dongle!)
Up to 10 MHz visible bandwidth (single tuner mode) or 2 slices of 2 MHz spectrum (dual tuner mode)
3 software-selectable antenna ports ( 2 x 50 Ohms and 1 x 1k Ohms high impedance balanced/unbalanced input)
High impedance antenna port (1 kHz to 30 MHz) with selectable MW notch filter and choice of 2 pre-selection filters
Software selectable AM/FM and DAB broadcast band notch filters for the 2 SMA antenna (1 kHz to 2 GHz) antenna ports
External clock input and output enables easy synchronisation to multiple RSPs or external reference clock
Powers over the USB cable with a simple type B socket
11 high-selectivity, built in front-end preselection filters on both the 2 SMA antenna ports
Software selectable multi-level Low Noise Preamplifier
Bias -T power supply for powering antenna-mounted LNA
Enclosed in a rugged black painted steel case.
SDRuno—World Class SDR software for Windows
Documented API for new apps development
SPECIFICATIONS General
Weight 315g
Size: 95mm x 80mm x 30mm
Low Current:
Single tuner:180 mA (excl Bias T)
Both tuners: 280 mA (excl Bias T)
Frequency Range
Continuous coverage 1 kHz – 2 GHz
Connectivity
USB 2.0 (high speed) type B socket
Tuner 1 Antenna Coax Port Characteristics
1kHz – 2GHz operation
50 Ohm input impedance
SMA female connector
Tuner 1 High-Z Port Characteristics
1 kHz – 30 MHz operation
1k Ohm input impedance (balanced)
Pluggable screw connector (CTB9208/3 plug supplied)
Tuner 2 Antenna Port Characteristics
1kHz – 2GHz operation
50 Ohm input impedance
SMA female connector
Selectable 4.7V DC out (see Bias T)
Reference Clock Input and Output ADC Characteristics
Sample frequency 2 – 10.66 MSPS
14 bit native ADC (2 – 6.048 MSPS)
12-bit (6.048- 8.064 MSPS)
10-bit (8.064- 9.216 MSPS)
8-bit (> 9.216 MSPS )
Bias T (Tuner 2 Port only)
Software selectable 4.7 V @ 100 mA
Maximum recommended input power
0dBm continuous, 10 dBm for short periods
Typical Noise Figures (50 Ohm)
18 dB @ 2 MHz
15 dB @ 12 MHz
15 dB @ 25 MHz
15 dB @ 40 MHz
3.3 dB @ 100 MHz
3.3 dB @ 200 MHz
5.8 dB @ 340 MHz
3.6 dB @ 660 MHz
4.3 dB @ 1500 MHz
5.0 dB @ 1800 MHz
Typical Noise Figures (High-Z)
14 dB @ 2 MHz
18 dB @ 15 MHz
IF Modes
Zero IF, All IF bandwidths
Low IF, IF bandwidths less than or equal to 1.536MHz
IF Bandwidths (3 dB)
200 kHz
300 kHz
600 kHz
1.536 MHz
5.0 MHz
6.0 MHz
7.0 MHz
8.0 MHz
Maximum recommended input power
0dBm continuous
10dBm for short periods
Reference
High temp stability 0.5 ppm TCXO
In-field trimmable to 0.0 1ppm.
External Reference Clock
When an external clock is applied,
auto-detect will switch to the external
reference. Ideally the external clock
source should be connected to the
RSPduo before power up
Front End Filtering (Coax Antenna Ports):
Automatically configured front end filtering:
Low Pass Band Pass
2-12 MHz
12-30 MHz
30-60 MHz
60-120 MHz
120-250 MHz
250-300 MHz
300-380 MHz
380-420 MHz
420-1000 MHz
High Pass Notch Filters (Coax Antenna Ports)
FM Notch Filter:
>30 dB 77 – 115 MHz
>50 dB 85 – 107 MHz
>3 dB 144 – 148 MHz
MW Notch Filter:
>15 dB 400 – 1650 kHz
>30 dB 500 – 1530 kHz
>40 dB 540 – 1490 kHz
DAB Notch Filter:
>20 dB 155 – 235 MHz
>30 dB 160 – 230 MHz
Front End Filtering (High Z Tuner 1 Port)
Choice of 0-2 MHz and 0-30 MHz low pass
Notch Filters (High Z Tuner 1 Port)
MW Notch Filter:
>15 dB 490 – 1640 kHz
>30 dB 560 – 1470 kHz
Note: The notch filters above are software
selectable and remove specific broadcast
bands. Each port carries its own filters which
can be independently selected.
Operating Modes
One receive stream, any IF mode or bandwidth, software selectable from either tuner, or...
Two simultaneous receive streams from both tuners using low IF mode and bandwidth limited to 1.536MHz maximum
Important Note:
This unit does not include USB cable, antenna connectors,
coax cable or antenna -> See Accessories Below for USB cable and antenna adaptors.
Warranty:
This unit comes with a 12 Month Warranty.
Download The RadCom/RSGB Review (click below): VIDEO 
