The OPEK NMO-3 is an antenna mount installation hardware kit. It is typically mounted on a vehicle it is often installed in field applications inside cabinets and enclosures.
It is suitable for Ham Radio Antenna applications between 0-1000 MHz.
It is a permanent mount and requires a 5/8 inch (16 mm) mounting hole. Mounting surfaces up to 3/8 an inch thick. Typical applications include low band, UHF and VHF antennas. Opposite to the NMO connector is a UHF-Female (SO-239) connector.
- NMO Antenna Connector
- UHF-Female (SO-239) Cable Connector
- Overall Length: 2-Inches